General Discussion Gear Reviews & Questions » Chain Ring Rss Feed  
Moderators: the bear, Ron Reply
2013-10-04 8:42 AM

Member
10

Singapore
Subject: Chain Ring
Hi Triathletes,

i am building up a new bike. i have decided the frame and wheels. now is the group set.

i am look at the SRAM Force and it new to me as i usually go for shimano.

HELP ME!!!

as i am looking at the crankset for SRAM it offer me the 53/39T combo. so i though of changing it to a 56/42T combo with Sram Force/red crank arm.

but i am stuck and kinda lost. (correct me if i am wrong) i notice Shimano's Chainring there is type A and Type B. i read online that mention type A outer ring best to match with a type A inner ring vice versa for type B.

so now for example if i use a FSA 56T outer chainring with a 130 BCD, 5bolt patten and Sram 42T inner chainring with 130 BCD, 5bolt patten on my crankset. WILL IT WORK???? is there such thing as type A or type B chainring for SRAM,FSA,Vision and etc..

what special tool do i need? any form of adjustment i need to do beside shifting the front D upward for space clearance??

Pros out there, please enlighten me... Z.Z

Ronnie


2013-10-04 8:51 AM
in reply to: 0

User image

Champion
10156
500050001002525
Puyallup, WA
Subject: RE: Chain Ring

Yes, they will work. It's a matter of degree. I've mixed and matched chainrings for 35 years, including 'rings with no ramps and pins. The only thing that's truly needed to match is the BCD (bolt circle diameter) and the number of arms on the spider (5-bolt vs others). Yes, matching Shimano A-types or B-types will work better, but others will work, just may need a little more coaxing to make the shift.

But... a 56/42? Do you really have the legs to push that 56? Most mere mortals are dropping down to compact (110mm BCD) cranks with 50/36 or 50/34 combos...



Edited by briderdt 2013-10-04 8:52 AM
2013-10-04 8:56 AM
in reply to: 0

User image

Champion
6594
50001000500252525
Knoxville area
Subject: RE: Chain Ring
First... You probably don't need a 56/42 chainring. That's a BIG gear, bigger than most pro's need. Heck, even Tony Martin only used a 58t and he's the world champion.

That said, if you do decide to go that route... yes a 56/42 is fine so long as the bolt pattern is the same.

The things that won't work are something like a 130bcd and 110bcd mix. Also, a big drop in ring sizes from big to small (like a 56/39) can cause shifting issues/dropped chains. 56/42 should be fine.

As to shimano's "A/B" system, it has to do with where the ramps/pins are located on the rings. You match them up for smoother shifting. It is not a big deal though... MANY people have mix/matched a's and b's with success.

*Crap... beat by Dave.

Edited by Leegoocrap 2013-10-04 8:58 AM
2013-10-04 9:59 AM
in reply to: Leegoocrap

User image

Champion
10156
500050001002525
Puyallup, WA
Subject: RE: Chain Ring

Originally posted by Leegoocrap *Crap... beat by Dave.

Hey, at least we agree. Wink

2013-10-05 6:38 AM
in reply to: Ronnieosy

User image

Pro
5080
5000252525
Greater Pittsburgh
Subject: RE: Chain Ring
A and B chain rings are designed for different inner/outer ring combinations. Type B is the most common, used with 52 or 53 with 39. Type A is the 53, 54, 55 to be used with a 42 inner. There's actually a type E as well, which is 56/44.

But to Chris and Dave's point, very highly unlikely you need a 56/42... about the only pro's riding 56 are the ones on 650 wheels and even at that point, they're very few.

56x12 would give you almost 33mph at 90rpm... and even a 56x19 is well over 20mph. Are you averaging close to 30mph in your races? If not, then you'll be way over geared. Keep in mind that you can average over 25mph over a 40k with a compact (50/34 or 36) and a 12x25 cassette... a 50x12 gives you almost 30mph at 90rpm...
New Thread
General Discussion Gear Reviews & Questions » Chain Ring Rss Feed  
RELATED POSTS

56 tooth chain ring

Started by vonschnapps
Views: 326 Posts: 3

2007-04-09 7:44 AM vonschnapps

chain ring sizing

Started by JBfromNC
Views: 299 Posts: 4

2006-05-25 6:36 AM run4yrlif

Big Chain Ring vs tension on stationary bikes

Started by sharonnagy5
Views: 708 Posts: 4

2005-03-25 7:03 PM Zilla

bike question relating to chain rings/crank system

Started by auto208562
Views: 676 Posts: 11

2005-02-18 11:21 AM auto208562

Chain ring question

Started by huskyboy
Views: 651 Posts: 5

2005-01-29 9:06 PM huskyboy
RELATED ARTICLES
date : January 27, 2011
author : Mark Sunderland
comments : 0
The no-excuses guide to riding outdoors in snow, wind, ice and darkness. Bring it on!
 
date : October 12, 2009
author : Coach-Al
comments : 0
Learn the basics of what happens when you run. Also covered are the principles of elasticity, mobility and stability. Run faster without running the big miles.
date : May 5, 2009
author : FitWerx
comments : 0
Having trouble shifting? Is your chain not going to the next gear properly? Is it making too much noise? This video will go through some adjustments to your front and rear derailleurs.
 
date : March 2, 2009
author : FitWerx
comments : 5
Dirty bike chain? Have you ever thought about cleaning it? We cover the basics of how to clean your bike chain and the use of different cleaners, degreasers and lubricants.
date : November 5, 2008
author : FitWerx
comments : 0
How often should you have a bike tune up and what should be included? Is it unreasonable to expect a refitting as part of the tune up?
 
date : May 30, 2008
author : FitWerx
comments : 0
Discussions on chain cleaning and degreasers, proper crank length, triathlon bike fit, lateral foot pain, foot numbness and tricep and shoulder pain.
date : November 6, 2007
author : Ron
comments : 2
Don't know how to take that rear wheel off of your bike? Is the chain making things difficult? Learn how to remove your rear wheel if you have to change your bike tire or fix a flat.
 
date : May 17, 2007
author : Ron
comments : 2
Not your typical review, but a review nonetheless. The first thing we triathletes need before any training can be contemplated is COFFEE! Learn how to make espresso for early morning workouts.